Determine the equivalent mass and number of molecules of water of crystallisation in a sample of Mohr’s salt FeSO4 (NH4)2 SO4.nH20. Provided N/20 KMnO4
Determine the equivalent mass and number of molecules of water of crystallisation in a sample of Mohr’s salt FeSO4 (NH4)2 SO4.nH20. Provided N/20 KMnO4
Chemical equations
Theory
Normality of ferrous ammonium sulphate can be determined by directly titrating it against standard (N/20) KMnO4 solution.
Eq. mass = Strength/normality
Substituting the value of strength and value of normality as calculated above, the equivalent mass of Mohr’s salt can be calculated. Suppose it comes out to be E.
Since Eq. mass of mohr’s salt is equal to its molecular mass, therefore molecular mass of Mohr’s salt is also equal to E.
Indicator
KMnO4 is a self-indicator.
Endpoint
Colourless to permanent pink (KMnO4in burette).
Procedure
- Rinse and fill the burette with N/20 KMnO4 . solution.
- Weigh exactly 4.90 g of Mohr’s salt and dissolve in water to prepare exactly 250 ml of solution using a 250 ml measuring flask. Rinse the pipette with the prepared Mohr’s salt solution and pipette out 20.0 ml of it in a washed titration flask.
- Add one test tube (~ 20 ml) full of dilute sulphuric acid (~ 4 N) to the solution in titration flask.
- Note the initial reading of the burette.
- Add KMnO4 solution into the titration flask from the burette till a permanent light
pink colour is imparted to the solution in the titration flask on addition of a last single drop of KMnO4 solution. - Note the final reading of the burette.
- Repeat the above steps 4-5 times to get three concordant readings.
Observations
Calculations
The post Determine the equivalent mass and number of molecules of water of crystallisation in a sample of Mohr’s salt FeSO4 (NH4)2 SO4.nH20. Provided N/20 KMnO4 appeared first on Learn CBSE.